The computerized measuring system designed to measure the resultant magnetic properties of the integrated samples made of the hard magnetic composites with both homogeneous and heterogeneous properties is the computer supported station ensuring a fully automated measuring process with tabular and graphic presentation of the obtained data.

The usage of the measuring system resolves into the data input of measurement's and measuring head's parameters from the computer keyboard.

The MAG-ST100 system provides measuring and determination of:
- demagnetisation characteristic B=f(H)
- demagnetisation characteristic J=f(H)
- remanence Br
- coercive field strength HcJ
- coercive field strength HcB
- max. energy (HB)max
- the final setting of obtained results

The MAG-ST100 system contains:
- electromagnet
- the unit for measuring magnetic quantities containing two microprocessor fluxmeters to measure induction and magnetic field strength,
- the integrated sensors head permitting determination of induction, polarization and
magnetic field strength
- the unit controlling the measuring process responsible for all measuring procedures and automatic control of the correctness of operation
- computer IBM PC
- HP laser printer

TECHNICAL DATA:
1. Electromagnet:
- air gap (0 ÷ 50) mm
- pole diameter ca. 80 mm
- max. magnetic field strength ca. 1600 kA/m (ok. 2T)
2. Power supply:
- mains 3 x 400V; 6,5 A; (50 - 60) Hz
- output voltage (0 ÷ 115) V
- max. output current ca. 25 A
3. Fluxmeter:
- resolution - 10E-6 Wb
- drift - 10E-6 Wb/min

The MAG-TD100 system fulfil the requirements of IEC60404-5 Standard