Liquid polysulfide rubber as the basic material, adding tackifying resin, vulcanizing agent, accelerant and fortifier makes up the two-component polysulfide sealant (double-component polysulfide sealant). It is a kind of two-component sealant that can vulcanize and crosslink by itself at room temperature. Its appearance is exquisite and even paste or ropy liquid, so it is also called two-component polysulfide sealing paste. It is made up of A component and B component. A component is hoary even paste and B component is black even paste. The two components have clear color difference, which makes the mixing more convenient. The mixing ratio is A : B=100 : 8 - 12. It has good bonding effect to metal, concrete and other material. It can keep good air tightness and waterproof ability in continuous vibration and temperature changes.
The classification of two-component polysulfide sealant:
It can be divided into two kinds according to the flowability: non-slumping and self-leveling.
It can be divided into two kinds according to the movement ability: 25 and 20.
It can be divided into two kinds according to the tensile modulus: high modulus (HM) and low modulus (LM).
Features:
Excellent adhesion performance: it has good bonding effect to cement, steel, glass, wood and natural stone.
Resistant to water: it is stable facing sea water, tap water and distilled water.
It is not resistant to concentrated acid and alkali. But it is stable facing the diluent inorganic acid, alkali and various salts.
Excellent anti-aging and resistance to high temperature. It can work in the temperature of -40°C - +120°C for long time.
Resistant to ultraviolet.
Non-toxic, good air tightness and high elasticity. It has the best air tightness among all the sealants.
Package:
Big packing: A component: 360kg/drum, B component: 30kg/pail.
Small packing: A component: 36kg/pail, B component: 3kg/can.
Packed as customers' requirements.
Shelf life: 12 months in the original unopened package stored in dry and cool environment and the temperature not exceeds 27°C.
Color: A component is hoary, B component is black, and the mixture is black.
Using method:
Clean the bonding surface to keep it dry and clean.
Painted the primer on the surface before construction. Glue protective adhesion tape on the two sides of the joints after the surface is dry to avoid the needless sealant pollute the surface.
Mix A component and B component fully until no color difference. B component should be more in winter and less in summer than normal because of the climate difference. You should have a try before using.
Squeeze the mixed polysulfide sealant into the joints with lime knife or caulking gun until the joints being full. Then make the sealant smooth with lime knife.
Take off the protective adhesion tape after the construction finished and avoid to make the surface be exposed to rain within 24 hours.