Products. Companies. Trade leads

Sodium Formate Molecular Formula: HCOONa Molecular Weight: 68 Product Introduction: This product is a white crystalline powder with water absorbing performance and slight formic acid odor, soluble in water glycerol, slightly soluble in ethano, not soluble in ether. Its melting point is 253oC. Mainly applied to the manufacture of formic acid and oxalic acid, as well as to the manufacture of dimethyl formamide. Usage: [1] Sodium Formate is used in leather industry, serves as camouflage[...]

FOR COATING titanium dioxide rutile type SR-235 Typical Properties TiO2 content,% 99 Rutile content,% ≥98 Inorganic coating NO Organic treatment NO Crystal size um 0.36 Bulk density,g/c m³ 1.1 Color CLEL* ≥98 Oil absorption,g/100g 15－19 PH 6.5－8.5 Specific gravity,g/cm³ 4.2 Characteristics SR-235 is an uncoated multipurpose rutile titanium dioxide pigment,it procides good whiteness,high hiding power,middling dutability and ease of dispersion. Applications Primer[...]

Winstrol - Stanozolol is a very commonly used anabolic steroid for cutting cycles. While many people will attempt to use Dianabol or even Anadrol for cutting cycles, I´ve really never heard of anyone using Stanozolol for anything except a cutting cycle. It´s a bit of a one-trick-pony in this respect. Let me repeat that: Stanozolol is a cutting drug. Not many people will argue for its use in a bulking cycle. It´s certainly not a very effective compound for treating anemia (1) and thus, one could[...]

UPA’s Southern Green Finishing Top Coat is specially formulated for quality hand and machine finishing of plasterboard joints. Encompassing a ready-mixed non-asbestos vinyl formulation, it is used for embedding joint fibre tape, for filling and for final touch-up coats in interior plasterboard applications. It is an ideal compound for covering embedded fasteners, corner beads and for skim coating panel surfaces where necessary. Applications UPA Southern Green Finishing Top Coat should[...]

Sell: Ready-to-use heat-resistant gluey mass (glue, mastic, adhesive). Operating temperature up to + 800 C, resistant to oil products, cold-proof. Made of silicate binding material and thermo-resistant mineral stuff. Suitable for building and repair of ovens, furnaces, chimneys, for gluing, finishing (plastering) of heating surfaces, for restoration, stopping of small openings and cracks. Highly-adhesive to various surfaces (bricks, concrete, firestone, ceramics, glass, vermiculite, calcium-silicate[...]

HICEM Colored Grouts for Ceramic Tile:CGCT are highly efficient and superior grout for filling in the gaps between ceramic tiles. It is composed of White Portland cement, binder, pigments, and other chemical agents. It is resistance to harmful effects from moisture, surfactant and abrasive cleaning action. Hicem CGCT is quality controled to blend performance and color to whatever tile product is contemplated. HIcem -CGCT catagories:- 1. Hicem-CGCT Standard 2. Hicem-CGCT Microkiller 3. Hicem-CGCT for Glassblock[...]

Profiputz is a ready-made, waterborne putty designed for filling voids and levelling indoor walls and ceilings. Depending on the putty type (4 types) the maximum single layer thickness is 1 to 5 mm. The putty can be used to level mineral plaster surfaces, drywall panels, previously primed wood and wood-based materials. High quality of the putty ensures smoothness and matt appearance of the surface, its superb adherence to the substrate, high air and water vapour permeability. The putty is easily[...]

Polyester powder coatings 1.General Introduction 　　This type of powder coating is prepared from polyester resin. It can be used in the coating for outdoor products, such as the shell surface coating for outdoor electrical equipments, construction decorating and highway protective fence. 2.Product Series 　　Products of different gloss are available: high gloss (above 80%), semi gloss (50-80%), flat gloss (20-50%) and no gloss (below 20%). (The gloss can be adjusted according to the[...]

Product Name: Hydroxypropyl Methyl Cellulose(HPMC or MHPC) CAS Code: 9004-65-3 Appearance: white or off-white powder Viscosity: 5-150000mPa.s Package:25 kg/bag PH value:4-8 Burnt resides: 1%max Loss or drying: 5%max Methoxyl content: 28-30% (HT-E) 27-30%( HT-F) 19-24%( HT-K) Hydroxypropoxyl content: 7-12% (HT-E) 4-7.5%( HT-F) 4-12%( HT-K) Gelation temperature: 58-64 (HT-E) 62-68 ( HT-F) 70-90 ( HT-K) The special specification may make to order. use:1.used[...]

- Mr. Expert HRP 108 is based on sulphonated naphthalene formaldehyde.Mr. Expert HRP 108 offers much higher performance than the normal plasticizers. Mr. Expert HRP 108 is used to give very high levels of workability or water reduction from 25% to over 30%. It is used extensively on large projects where reinforcing steel requires high workability.Also used in precast and on site where large water reduction provides very high early strength and improved durability. Benefits - • Offers[...]