Products. Companies. Trade leads

CNC Lathe(CLK6430/CLK6440/CLK6140H/CLK6140S/CK6415/CK6415A) Specification Unit CLK6430 CLK6440 CLK6140H CLK6140S CK6415 CK6415A Max. swing over bed mm 300 540 400 540 300 300 Max. swing over carriage mm 200 270 230 270 150 150 Max. working length mm 220 235 500 600 150 150 Travel for X axis mm 170 245 220 245 300 300 Travel for Z axis mm 260 275 500 660 300 300 Positioning accuracy mm 0.016/0.02 0.012 0.016/0.2 0.012 0.016/0.02 0.016/0.02 Repostioning accuracy mm 0.007/0.008 0.006 0.007/0.008 0.006 0.007/0.008 0.007/0.008 Rapid[...]

CNC-Drehbearbeitungszentrum ECOTURN 200 Fanuc CNC O-TC Fabrikat: Daewoo Baujahr: 1991 / wenig gelaufen, guter Zustand! Technische Daten: Arbeitsbereich Ø 370mm x x550mm Spindeldrehzahl 40 – 4000 min−1 Steuerung TNC Fanuc O-TC Werkzeugaufnahme 10 Revolverstationen Tischbelastung 45° Schrägbett Spindeldurchlaß Ø 42mm Spindelnase ASA A2-6 Spannzangen 4-50 mm Spannfutter 200-48mm Eilgang X/Z 10/15 m/min Werkzeugschaft 25 x 25 mm Spindellaufzeit ca.5000[...]

Corrugated pipe extrusion line Product Introduction: This line consists of extruder (SJ30/25, SJ45/25, SJ65/25, and SJ90/25), molding machine, moulds, air blower unit, arithmometer, crimper. It can continuously mold thermoplastic PVC, HDPE, and LDPE corrugated pipes with different sizes. Extruder Model name SJ-30/25 SJ-45/25 SJ-65/25 SJ-90/25 Die block(couple) 40 42 42 42 Production pipe range(mm) 4-10 10-40 20-63 50-160 Production speed (m/min) 5-10 3-15 2-8 0.3-8 Output(kg/h) 8 30 60 80[...]

Type: G4240/50 (worm wheel drive) Max.cutting/sawing capacity (mm): Round material ---- 400 Square material ---- 400*500 Process speed (m/min): 25/35/50/65/83 Saw blade specification (mm): 34*1.1*4650 Total power of machine tool (kw): 4.175 Working clamping method: Hydraulic Saw blade tensioning form: Manual Weight: 1400 kg Size(LxWxH): 2110*1050*1550 mm[...]

1) Use PLC programmable controller and touch screen to finish the auto-cycle process of opening-closing mold, feeding, heating, heat preservation, cooling, demolding and releasing. 2) According to different products wanted, choose different feeding methods such as common, pressure and vacuum to ensure feeding speed and uniformity. 3) Hydraulic system used in the machine can save 30% energy. Its operation and locking molds are used by the main and auxiliary cylinder respectively. 4) Use digital[...]

Adopting extrusion technics, and the final products, which can endure pressure 0.4-2.5Mpa, are mainly used in the indoor water supply. Using hot-melting for weld, antisepsis, and anticorrosive. And these kinds of pipes are the new water supplying products, which are environment- protection. PP, PE pipes are widely used in winter warm-getting of the cold areas., and which will not transfigure and swell in the high temperature of 100°C, so they are the ideal substitute of metal pipes. Main technical[...]

Sand blasting machine equipped with electro-pneumatic control which effectively rises its work comfort. As in case of Sandmaster Pro and Sandmaster Plus it has a dosage FSV valve with electro-pneumatic control. Both Sandmaster Junior and Sandmaster Junior Plus has a small filter surface, therefore frequent cleaning is required approximately every 20 minutes. In order to solve this problem the machine can be equipped with an additional separating cyclone. It will remove 90% of dust before they get[...]

The new Blocking Group F2258N could short the clamping time in maximum while moving smoothly & operating easily. The holes on the vise base are operated by CNC, which could fit the new Blocking Group F2258N strictly to meet the high requirement of positioning accuracy, while all other parts and specification are same with standard ART.1 series.[...]

Twin-screw pvc rigid pipe extruder: 1. Using thermal oil circulation for barrel cooling as to keep temperature from fluctuations. This stabilizes the quality and the output of finished products during the mixing process, it also enables gearbox to operate under high torque and high capacity. 2. Screw and Barrel are made of ACM-2 material with heat and nitride treatment, each finishing procedures are carefully controlled; it is therefore fabricated with special characteristics of high resistance[...]

Type of injection moulding machine: Arburg Allrounder 221M 55-250 Year of production: 1996 Clamping force (in t): 25 Opening: 200 Mould height: 150 Wtrysk (in g): 41.00 Distance between tie bars: 221 Power (in kW): 9.50[...]