Products. Companies. Trade leads

Cylinder liners / sleeves manufactured through cast-iron process, in Grey cast-iron. Which has enough hardness, toughness strength and wears resistance. They are of two types’ Dry liners / sleeves and Wet liners / sleeves. Which are press fit or split fit in to the engine. The allowance for the fitment between liner and bore holes is 0.050 to 0.075 mm. these are available in Semi-Finish (SF) and Fully-Finish (FF) condition. The available ranges are suitable for light, medium and heavy duty applications.[...]

Accessories for Tyre - Tube Valves. 1. Valve Core Housing TR CH -3 for TR -218 / TR - 618. Valve Core Housing for Large Bore Core Chamber. 2. Hexagonal Nuts of Various types such as BN-I / BN-II / BN-III, etc. 3. Rim Nuts of Various types such as LN -10, etc. 4. Valve Caps of different types such as Key type, Dome type, Hex type Short, Hex type Long etc. 5. Various types of Plungers for English Pattern Bicycle Tube Valves.[...]

Connecting rods are made of open / closed die from hot steel forging process for heavy duty application, also made through casting from spheroidal-graphite (SG) iron for light duty application. Small-end fitted with shell bushing or plain for light application and Big-end are normally either serrated or grooved and tongue joints which is having bolts either sides, a pair of split bearing is used inside Big-end housing bore.[...]

The pistons are made of aluminum alloy through casting process. The ability of the cast material is to have high strength, strength for high hot resistance for surface abrasion, better thermal conductivity and low thermal expansion. The piston consists of bare compressor ring groove or insert of spheroidal-graphite (SG) alphin for long lasting.[...]