Products. Companies. Trade leads

[Chemical name] O-(7-Azabenzotriazol-1-yl)-N,N,N',N'-tetramethyluronium hexafluorophosphate [CAS NO] 148893-10-1 [Molecular formula] C10H15F6N6OP [Molecular Weight] 380.23 [Appearance] A white crystalline [Melting point] 183~186°C(dec.) [Purity] Not less than99% [Loss on drying] Not more than0.5% [Package] 25g/ bottle; 100g/ bottle; 500g/ bottle; 1Kg / bag; 25kg/drum [Storage] Store in a cool, dry place[...]

[Product Name] N,N'-diisopropylcarbodiimide; DIC; DIPCDI [CAS NO.] 693-13-0 [formula] C7H14N2 [Molecular Weight] 126 [Appearance] A colorless or light yellow liquid [Boiling point] 145-148°C [Density] 0.806 g/mL [Purity] Not less than99% [Package] 100ml/ bottle, 500ml/ bottle, 1000ml, 20Kg / barrel; 25Kg / barrel [Storage] Store in a cool, dry place[...]

[Product Name] 1-Ethyl-3-(3-dimethyllaminopropyl)carbodiimide hydrochloride; EDC.HCl; EDAC.HC [CAS NO.] 25952-53-8 [Molecular formula] C8H17N3.HCl [Molecular Weight] 191.7 [Appearance] A white crystalline [Melting point] 110~115 °C (dec.) [Purity] Not less than99% [Package] 25g; 100g; 500g; 1Kg / bag; 25Kg / barrel[...]

DBPH 2,5-Dimethyl-2,5-Di(Tert-butyl peroxide)hexane CAS no.78-63-7 vulcanizator for silicone rubber Chemical name 2,5-Dimethyl-2,5-Di(Tert-butyl peroxide)hexane Molecular formula C16H34O4 Molecular weight 290.44 CAS NO. 78-63-7 UN NO. 3105 CN NO. 52005 EINECS. 201-128-1 Brief Introduction： DBPH is a low volatility, yellowish liquid , dialkyl peroxide for cross linking of elastomers (silicone rubber, EPDM, PE etc.). Mp 8 ℃, relative density 0.8650, refractive index[...]

rubber vulcanizator N,N-m-phenylene bismaleimide HVA-2 PDM CAS NO.3006-93-7 Chemical name N,N-m-phenylene bismaleimide Molecular formula C14H8N2O4 Molecular weight 268 CAS NO. 3006-93-7 UN NO. 2811 CN NO. / EINECS. 221-112-8 Brief Introduction： PDM is Yellow or brown powder,specific gravity: 1.44. It is soluble in dioxane, 4-hydrogen furan, and hot acetone; insolvable in petroleum ether, chloroform, benzene and water. As multi-functional auxiliary agent for rubber, HVA-2[...]

TAICros Triallyl Isocyanurate 99.5% TAIC CAS NO.1025-15-6 Chemical name Triallyl Isocyanurate Molecular formula C12H15O3N3 Molecular weight 249.27 CAS NO.1025-15-6 UN NO. / CN NO. / EINECS. 213-834-7 Brief Introduction TAIC is multifunctional alkene monomer with aromatic heterocycle. It is not dissolves in water, slightly dissolved in alkane, and completely dissolves in aromatic hydrocarbon, alcohol, acetone, hydrocarbon halides, cyclopentene hydrocarbon. TAIC is widely[...]

Technical Date Sheet BPO Molecular formula C14H10O4 Molecular weight 242.23 CAS NO. 94-36-0 UN NO. 3104 CN NO. 52045 EINECS. 202-327-6 Chemical name Benzoyl peroxide Prepared By ICASON PM REVISION：2010 Approved By PRODUCTION SPECIFICATION Valid From：2010-10-1 Type 1, BPO 75% water –wet granules Brief Introduction： BPO75% is a free flowing granular form of water damped diacyl peroxide, used as initiator of polymerization in styrene, acrylic resins; and curing agent[...]

dicumyl peroxide cas no.80-43-3 unno.3110 Brief Introduction: Dicumyl peroxide is white crystalline.Melting point of 41 - 42 ℃. Relative density of 1.082.Decomposition temperature 120 - 125 ℃ room temperature stable. Gradually become yellowish under light. Insoluble water, soluble ethanol, ether,acetic acid, benzene and petroleum ether. Theoretical Active Oxygen 5.92% (purity 100%), 5.62% (95% purity); Half Life Data: 100hr, Half Life Temp………101℃ 10hr, Half Life Temp………117℃ 1min,[...]

Electrical polyester non-woven cloth is made from polyester fiber, with high heat resistance and excellent impregnating and dielectric properties, which is widely used for base materials of flexibel laminated composite such as DMD , DMD100 and prepreg DMD, it also can be as the reinforcement material of mica tape, base layer of insulation varnished cloth and and also be used for wrapping motor coil and magnet wire and cable. EI7031T the polyester non-woven is special design for base material[...]

This adhesive tape is made of glass cloth single or double coated with silicone or acrylic resin, which shows excellent electrical, mechanical and anti-solvent properties, widely used in coil, slot and liner insulation of motors and other electrical equipments.[...]