Fluorine Silicon Rubber Increases Creepage Distance Skirt
A. Purpose
The high temperature vulcanizing fluorine silicon rubber increases creepage distance skirt (climbs skirt for short) is used in equipment porcelain of the station with AC35-220kv and above. It can enhance the “flashover” voltage of serious defilement area effectively. It also good corrosionproof and aging resistance. After use this product, increases climbs’ effect is evidently, and the capability of flashover preventation and ice-flash preventation is improved effectively. The climbs skirt is light in weight. It is convenience to construct scene.
B. Structure and use
Climbs skirt is silicon fluorine rubber product. It is the only producer in china. It is detected by national authority institution. Its insulatibity, hydrophobic and mobility etc. are all better than general rubber products. When use in normal temperature, bond the umbrella skirt and porcelain by silicon fluorine bond. Attention to fill by bond at the opening joint, don’t leave clearance, make the umbrella skirt and porcelain to one thing. Clear odd bond after planish. The power can run after the surface is dry.
C. Size
Number
Specification (mm)
Number
Specification (mm)
1
Ø 50×Ø 270
30
Ø 275×Ø 510
2
Ø 95×Ø 240
31
Ø 280×Ø 486
3
Ø 96×Ø 240
32
Ø 280×Ø 490
4
Ø 110×Ø 340
33
Ø 280×Ø 520
5
Ø 125×Ø 310
34
Ø287×Ø 575
6
Ø 140×Ø 375
35
Ø 300×Ø 460
7
Ø 140×Ø 380
36
Ø 305×Ø 560
8
Ø 150×Ø 365
37
Ø 305×Ø 470
9
Ø 150×Ø 367
38
Ø 314×Ø 487
10
Ø 150×Ø 370
39
Ø 320×Ø 500
11
Ø 150×Ø 375
40
Ø 325×Ø 545
12
Ø150×Ø 380
41
Ø 345×Ø 540
13
Ø 150×Ø 385
42
Ø 345×Ø 565
14
Ø 150×Ø390
43
Ø 355×Ø560
15
Ø 150×Ø 490
44
Ø 360×Ø 510
16
Ø 160×Ø490
45
Ø 380×Ø 555
17
Ø 163×Ø 455
46
Ø 425×Ø 650
18
Ø 165×Ø455
47
Ø 427×Ø 675
19
Ø 167×Ø 380
48
Ø 430×Ø 590
20
Ø 170×Ø380
49
Ø 465×Ø 700
21
Ø 170×Ø 410
50
Ø 490×Ø 735
22
Ø173×Ø 467
51
Ø 510×Ø 745
23
Ø 173×Ø530
52
Ø 520×Ø 800
24
Ø 175×Ø 465
53
Ø 530×Ø 715
25
Ø 210×Ø425
54
Ø 545×Ø 766
26
Ø215×Ø 455
55
27
Ø270×Ø 475
56
28
Ø 275×Ø 485
57
29
Ø 275×Ø465
58
D. Bond
a) clear
Use clean cloth wipe the surface of porcelain, wipe off defilement.
b) Preassemble
Chose the umbrella skirt which inner diameter match up with the porcelain and the outer diameter accord with the request, carry on to pack.
c) Rubberize
Well-distributed rubberize on the surface of the scraper (about 0.5mm). Apply the bond of the same thickness at the opposite of umbrella skirt.
d) Suit
Case the rubberized umbrella skirt and well placed. Even press the surface in order to remove the air in the joint surface, remove odd bond.
E. Package and deposit
a) Pack with the box.
b) Decide the package number according