1
Miniature Ball Bearings
DPI miniature bearings are manufactured with extra high precision. Their main application is in small low load high speed areas.
Miniature Bearings

. 1.5 to 5 mm bore diameter

. 6 to 9 mm bore diameter

. 1.5 to 4 mm bore diameter flanged type

. 5 to 9 mm bore diameter flanged type

. 1.984 to 9.525 mm bore diameter

. Magneto Ball Bearings

Application: Industrial

Due to their extra small size miniature bearings can operate at high speeds but can withstand very low loads. Most of the applications of these bearings are in the aeronautics industries and in the electronics industries.

2
Single Row Deep Groove Ball Bearing

DPI single Row Deep Groove Ball Bearings are ideally suited for high speed heavy load bearing applications.
Single Row Deep Groove Ball Bearing

. 16000 Series

. 6000, 6200, 6300, 6400 Series

. 62200, 62300, 63000 Series

. RMS, RLS Inch Series

Application: Industrial

Single Row bearings are particularly versatile. They are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.

Single row deep groove ball bearings are the most widely used bearing type. Consequently, they are available from DPI in many executions and sizes


3 Double Row Deep Groove Ball Bearings
DPI Double Row Deep Groove Ball Bearings are ideally suited for high speed heavy load bearing applications.
Double Row Deep Groove Ball Bearing

. 4200 Series

. 4300 Series
Application: Industrial
These bearings have deep uninterrupted raceways and high conformity between the balls and raceways. They are able to carry axial loads acting in both directions in addition to radial loads.

Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same outside and bore diameters, double row bearings are slightly wider than single row bearings but have considerably higher load carrying capacity than single row bearings in the 62 and 63 series

4 Self Aligning Ball Bearings
DPI Self Aligning bearings have two rows of balls and a common concave sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.
Self Aligning Ball Bearings

. 1200, 1300 Series

. 2200, 2300 Series
Application: Industrial
The self-aligning ball bearing has two rows of balls and a common concave sphered raceway in