Products. Companies. Trade leads

The split solar water heater is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems. 1)[...]

Features - High efficiency solar collector using heat pipes and evacuated tubes. - Able to be used in all climates. - Copper heat pipes are applied for rapid heat transfer. - Easy installation both on the roof and on the ground. - Applied for main water pressure. - 150mm pipe is applied in the inner tank for enough heat exchange. - Patented connection design isolates copper heat pipe from stainless steel inner tank, greatly reducing the damage caused by galvanic corrosion.[...]

Features: 1. Commodity: Seamless circular stainless steel tubes DIN 17456 1.4404/X2CrNiMo17132 2. Process method: Cold drawn/cold rolled 3. Surface finish: Anneal/pickling/manual polish/ mechanical polish 4. Material: 1.4404/X2CrNiMo17132 5. Standards: DIN 17456, DIN 17458, EN10216-5, etc. 6. Size: A) O. D.: 6 mm to 219 mm B) W. T.: 0.5 mm to 25 mm C) Length: Max. 20 meters 7. Delivery conditions: Annealled, Picklinged, Polished 8. packing: Seaworthy wooden[...]

Features: 1. Commodity: Seamless austenitic stainless steel pipe/tube 2. Process method: Cold drawn/cold rolled 3. Surface finish: Anneal/pickling/manual polish/ mechanical polish 4. Material: TP317L 5. Standards: ASTM A312/213, DIN17456 / 17458, EN10216-5, JIS3463, JIS3459, GOST, BS and so on 6. Size: A) NPS: 1/8" to 8" B) Schedule: 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S, acc. To ANSI B36.19 C) O. D.: 6 mm to 219 mm D) W. T.: 0.5 mm to 25 mm E) Length:[...]

Non-pressure Solar Water Heater, Solar Collector System, Solar Panel, Solar Energy Geyser KE58S Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L[...]

solar collector. widely used for projects like in hotels etc[...]

he meter works with ultrasonic flowrate measurement technology and remaially inthe case where the water has a high content of impurities. Furthermore, with the use of the meter, the pressure loss of pipeline can be reduced to a minimum. The meter can be mounted at any angle in either horizontal or vertical direction. In conformity with the National Standard on Heat Meter CJ128-2000 The meter falls into 2 different major categories, i.e. the CRL-H series household-use ultrasonic heat meter and[...]

integrated solar water heater,solar collector Features: 1) Designed by the standard of getting heat in winter 2) Dong'ao heat-wasting restraining technology 3) Acceleration of hot water circulation TG technology 4) High temperature vacuum heat collecting tubes 5) The thickened heat preservation layer of high density 6) Large-angle specially adapted to high and cold areas 7) Stronger wind, snow, and hailstone resistant ability 8) More coordinate with the architectural environment[...]

Patent NO. ZL2004300103715 1.Engine :18Hp water-cooled or wind-cooled electric -startup diesel engine , low noise and environmental protection, has the indication of water temperature .voltage and engine oil ,whose max rotating speed is 2200r/min. 2.Stirring :Diesel drives stirrer to run through gear pump ,dual control valve ,overflow valve and hydraulic motor. 3.Hydraulic tank: Tank is designed with windows, hot-spreading slice and indication of oil temperature with 68# hydraulic oil . The cubage:[...]

Model ST-500 Dimension 582X85X80 Central distance 500 water Content 0.38 Available area 2.4-3.2 The max.pressure 3.6 Thermal Output 189 working pressure 1.2-1.8 1.ADC12 Aluminum of International brand is the special anti-friction and anti-errosion material 2.The material of products has evident superiority over bronze,copper and steel in heat transfer efficiency due to its low thermal inertia. 3.The aluminum in liquid state in 730℃[...]