Products. Companies. Trade leads

Switches series 83 758 in metal casings Limit switches are designed to be used in the automated driving systems, control and measurement circuits of alternating and direct current. In switches series 83 758 with casing, body of switch 83 135 or 83 136 is situated inside metal casing. There are mobile make contacts and break contacts in switches. Position and speed of change-over contacts movement and time needed for switching them over depend on position and speed of displacement of the controlling[...]

Cutting device UK-1 is intended for use in a cutting room for cutting materials of substantial stiffness and thickness (for example: felt, soundproofing mats, stiff insulation sheets and needled cloths, upholster wets and elements for mattress production). Following elements are included in the device: * cutting table, * transverse knife, * pneumatic set strip, * instrumentation for mounting of cutting material, * sliding bumper to set length of cutting material. The[...]

SK-3 cutting table SK-3 cutting table is basic cutting room equipment in tailor's and upholsterer's shops. The modern and revamped construction was presented for the first time at the "INTERMASZ" fare this March. The whole construction is made of closed steel profiles ensuring proper durability and stiffness. The work-top made of 25 mm thick coated board with edges finished with aluminum angles also guarantees long lasting durability. Steel powder coating adds to the elegant look[...]

* Joystick for boom and bucket control * High lift boom attachment * Hydrostatic steering * High visibility cab design ENGINE - Make & Model CUMMINS QSX-15 - Type turbocharged & CAC - Displacement 15.0 L - Cylinders 6 POWER TRAIN SYSTEM - Torque converter single stage, single phase - Transmission full power shift - Rear axle oscillation 23o - Gear range / Speed 3F / 3R, 32.5 / 32.5 km/h OVERALL DIMENSIONS WITH EQUIPMENT [...]

Technical data Max. Drilling diameter 50 (MT4) 30 (ISO30, ISO40) Max finger cutter milling diameter 25 Spindle’s cone Number of spindle speeds Rge of spindle speeds (50/60 Hz) 12 Distance between vertical spindle and column (mm) 67-2010 / 80-2412 40-1300 / 48-1560 Distance between vertical spindle and table 200-550 Distance between vertical spindle and table 70-370 Distance between horizontall spindle and table mm 0-300 Vertical spindle’s escape 120 Table dimensions mm[...]

Dust collectors EKO type are easily build and also very practical. Those are designed to exhaust shavings, sawdust and wood-dust from wood machines, grinding stands, polishing from such materials like: plastics, rubber, ceramics, cast iron, amber; cleaning from mentioned above pollution. Polluted air is exhaust from emission zone by elastic pipe (EKO-1, EKO-2) or self-locking arm (EKO-RSS). In device there is separation of pollution: bigger particles goes to bottom bag, smaller settles on[...]

Passable exhaust of grinding dry dusts is equipped with bag filter as well as 4 cassette filters ensure filtrating effectiveness >90% (EU 5), find application in grinding, edging, pouring in different industrial branches. capacity ok. 800 m3/h compression 1600 Pa filtering surface 3 m2 chamber capacity 100 l engine - 0,55 kW – 220 V lub 3x 380 V filtering efficiency EU 5 (> 90%) velocity of air flow through device side surface max. 0,25 m/s noise level 64 dB ventilator typ[...]

Planes are made from high quality beech wood. Smoothing Plane 65 x 240 x 48 mm 60 x 240 x 45 mm 55 x 200 x 40 mm Jack Plane 65 x 240 x 48 mm 60 x 240 x 45 mm 55 x 200 x 40 mm Scrub Plane 50 x 240 x 32 mm Rabbet Plane 75 x 240 x 25 mm 75 x 240 x 30 mm[...]

* Dimensions: - length 260 cm - width 85 cm - height 140 cm; * max width of re-winded cloth 185 cm * screen dimensions 200x150 cm * weight 100 kg * weight re-winded bale max 50 kg * diameter of re-winded bale max 50 cm * re-winding speed 60 meters per minute * cloth leading setup- manual * screen setup- fluent 00-350 * equipment- 2 shafts with limiters * winding-looking machine is equipped with meter counter[...]

• REXEL UPHOLSTERY SCISSORS PNEUMATIC TABLE TYPE ST-3 • The table is patented in Poland. General information: Assembly table with pneumatic drive. Use - in general industry (depending on the table top), in the upholstery industry, for manufacturing (assembling) of upholstered furniture. The device is used for changing the height of furniture constructions placed on it during the manufacturing process. The table is supported with steel profiles, servo-motor and an automatic drive. The automatic[...]