Products. Companies. Trade leads

Air which was sucked in from air intake tower enters the suction air filter and after being removed of dust and other mechanical contaminants in it, it is compressed to the pressure of 1.0MPa by piston air compressor. Air from the air compressor is cooled to ~5℃ in the refrigeration unit, taken into the molecular sieve adsorber for removing H2O, C2H2 and CO2. There are two molecular sieve adsorbers which operate on a staggered cycle, i.e. one vessel is adsorbing the contained impurities while the[...]

Air which was sucked in from air intake tower enters the suction air filter and after being removed of dust and other mechanical contaminants in it, it is compressed to the pressure of 0.55MPa by centrifugal air compressor. Air from the air compressor is cooled to 10℃ in the direct contact after cooler and refrigeration unit after the water being separated its condensed water, taken into the molecular sieve adsorber for removing H2O, C2H2 and CO2. There are two molecular sieve adsorbers which operate[...]

Technology Introduction The ASP generates oxygen and nitrogen by cryogenics and is comprised of high-efficiency centrifugal compressor, molecular sieve purification, turbo expander for refrigeration and energy-saving rectification equipments. The control for the device is completed by DCS, and the particular patented technology owned by DEAR Air Separation Industrial Co. is adopted in the technological process which follows the most advanced and general international conventions and carries out[...]

New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry. 1) Cooling temperature range 5-35oC. 2) High-capacity tube-in-shell[...]

RTC series automatic mould temperature controller is mainly used for mould heating and keeping constant temperature,as well as for the fields with same requirement.This series adopts heat-exchanging principle,using water or high- heat-conduction oil as media to keep the mould at a constant temperature during molding, which guarantee top quality for molding.The optimized design ensures the heating tenmperature up to 200 degree centigrade.The characteristics of machine: (1)Computer control,direct-view,[...]

The hopper dryers of RDM series are quick-drying equipments for non-hygroscopic plastics and rubber.They can dry the humidified raw material caused by packing,transportation and retrieving.The equipment is best to be directly installed on the plastics or rubber molding machine. It is quick to install and it can save space.For all types of the equipments,the 24-hrs timer is availble as option. The characteristics of the equipment: (1)Nice design and appearance (2)Hot wind extending device in high[...]

The granulators of RG-26/36 series are suitable for crushing various defectives, wastes and offcuts made of soft or hard plastics in block, ball or bar shapes. It play an important role in increasing the availability of plastics. The characteristics of machine: (1)Integral body,sturdy and durable,keep excellent performance after using long time (2)Heavy-duty bearing and dust protection device,the sound-proof board can provent vibration and noise effectively (3) The overloading protector on[...]

Ningbo Kason Mold Plastic Co., Ltd specializes in manufacturing and designing plastic injection mold for more than 12 years. We have total 30 engineers provide strong ability to support customer new product development and tooling design. ISO9001 certified. Products range covers automotive, home appliance, medical, engineering, daily use products and so on. High speed CNC, precision EDM, double shots injection machine and CMM dimensional checking machine are served. Name Injection[...]

General specifications: Name:Plastic injection moulds Plastic material:PVC/PPR/PP/PE/ABS/POM/PPH/PERT/PVDF/PPSU/...etc Steel of Cavity & Core:DIN 1.2316/ DIN 1.2738/DIN 1.2344 /M300/ 718/ P20..etc Steel of Mouldbase:S50C.LkM standardetc Nos of Cavity:Customized Fitting standard:EN/DIN/GB/BS Core pulling system:Hydraulic cylinders Injection molding machine:Engel ES3550/550K Gate system:Tunnel gate/Point gate/Direct gate/Sub-gate/Rectangular gate...etc. Design software:AutoCAD/UG/Solidworks Mould[...]

General specifications: Name:Plastic injection moulds Plastic material:PVC/PPR/PP/PE/ABS/POM/PPH/PERT/PVDF/PPSU/...etc Steel of Cavity & Core:DIN 1.2316/ DIN 1.2738/DIN 1.2344 /M300/ 718/ P20..etc Steel of Mouldbase:S50C.LkM standardetc Nos of Cavity:Customized Fitting standard:EN/DIN/GB/BS Core pulling system:Hydraulic cylinders Injection molding machine:Engel ES3550/550K Gate system:Tunnel gate/Point gate/Direct gate/Sub-gate/Rectangular gate...etc. Design software:AutoCAD/UG/Solidworks Mould[...]