Products. Companies. Trade leads

Total capacity of tank 355 lt Working capacity (about) 315 lt Power single phase electr. motor 2,00 hp - 1,50 kw Power three phase electr. motor 2,00 hp - 1,50 kw Power gasoline engine 7,00 hp - 5,1 kw Power diesel engine 9,00 hp - 6,6 kw Weight with diesel motor (about) 320 kg Length[...]

We supply all stainless steel AISI 304 repair clamps, with NBR gasket inside, for reparing broken or leaked water & gas pipelines. On request with EPDM or FPM (Viton) gasket. DO NOT HESITATE TO CONTACT US![...]

Very good diamond blade diameter 400 mm for cutting granite high 15 mm split segment with a very high speed of cutting and nice lifetime.[...]

It's a Helium filling device with single filler suitable for charging Helium or nitrogen or a mixture into the refrigerant circuit. The unit is capable of performing a complete operating cycle including the following phases: Vacuum leak test; High pressure gas injection; Pressure leak test and gas discharge (or recovery with the He recovery unit). Jetto is available with or without the integrated leak detector.[...]

The new VM202 Vacuum gauge is an instrument suitable for hot-filament Pirani heads. The product has been engineered for high reliability and friendly using in the field of the refrigeration industries. It can tolerate large supply voltage variation and display features; both numeric and bargraph readouts. The VM202’s outputs comprise four isolated contact pairs: two for the high and low vacuum thresholds, one multi purpose and one for the timing of a solenoid valve. A special support[...]

Single phase, 4 pole, shaded pole motors, 220-240V, 50-60 Hz, 1300 r.p.m. suitable for operation in all positions. Motors are available both in closed (IP32 or in open (IP22) construction; end shields are in die cast aluminium alloy; the carbon steel shafts are supported by self aligning permanently lubricated sintered sleeve bearings with lubricant reservoir. Insulation is class B suitable for operation with ambient temperatures from -30° to +43°C. The standard version is equipped with two single[...]

R.M.P.A. manufactures a wide range of Conveyors, Turntable and Carousel Molding tracks, Foaming Robots or stationary mould clamps for the production of all kind PU items.[...]

Suitable to inject all kind of Polyurethane Foam, having the following technical features: DOSING MODULE - Open frame for easier maintenance, on wheels - N.2 Motors with inverters. - N.2 high pressure dosing pumps - Variation of ratio and out-put by closed loop system programmed and monitored through Operator Panel - N.1 high pressure cartridge filter for Iso. - N.2 pressure switch - Connection flexible pipes between machine body and mixing head. - Pneumatic stream distributor[...]

Jetto is an automatic gas charging machine able to perfor vacuum cycles and leak test; moreover it charges various refrigerant gases, such as: R134a, R22, R401, R402, R404, R407, and R410. This machine has been developed to satisfy the needs of domestic and commercial refrigeration and conditioning. When needed, it is possible to mount on the basis version a second filling channel, controlled by an additional card, and, thanks to a special support it is possible to lodge the refrigerant on board.[...]

Production Max 1800 bph for 1 partial label (production may be reduced in case of a wrap around label or more than 1 label application) Suitable for many cylindrical containers such as Wine bottles, Jam Jars, Spreads, Pickles, Sauces, etc etc (NO CONICHAL). The basic machine is suitable for the application of one body label on round bottles or front + back label on round bottles from the same reel. Variable speed motor not included in this machine (however it is equipped with the timed selection[...]